P0908

2017-10-10

Description:

  • The OBD-II fault code P0908 indicates an intermittent issue in the gate select position circuit. The gate select position refers to the position of the gear shift lever in vehicles with a manual transmission. This code is triggered when there is a sporadic or intermittent electrical problem detected in the gear shift lever position sensor or its associated circuit.

Possible Symptoms:

  • Intermittent malfunction indicator lamp (MIL) or check engine light illumination.

  • Intermittent difficulty or failure to shift gears smoothly.

  • Inconsistent or erratic operation of the gear shift lever.

  • Inaccurate gear selection display on the instrument panel.

  • Possible intermittent loss of power or drivability issues.

Possible Causes:

  • Loose or poor electrical connection in the gate select position circuit

  • Damaged or corroded wiring or connectors

  • Intermittent fault in the gear shift lever position sensor

  • Faulty ground connection

  • Faulty engine control module (ECM)

Related Parts:

  • Gate Position Actuator: The gear gate assists in gear shifting. This actuator controls how the gear is selected. If the actuator fails to select the right gear, there may be slippage or other malfunctions

Possible Solutions:

  • Inspect the wiring and connectors in the gate select position circuit for any damage, loose connections, or corrosion. Repair or replace as needed.

  • Ensure a secure and clean electrical connection for the gate select position circuit.

  • Check for any intermittent faults in the gear shift lever position sensor. Replace if necessary.

  • Verify the integrity of the ground connection for the circuit.

  • If all else fails, consider testing or replacing the engine control module (ECM) if it is determined to be faulty.

Search